最新下载
热门教程
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
python多线程学习笔记
时间:2016-04-19 编辑:简简单单 来源:一聚教程网
之前用linux shell写过多线程统计youku网站会员的,现在用python再实现一遍,做为学习笔记备注。
Python多线程可以通过导入thread模块,来使用thread中的函数,或者通过继承threading类来创建线程。
每个进程都拥有自己的地址空间,内存,数据栈以及记录其运动轨迹的辅助数据。
python代码的执行主要由python虚拟机(也叫解释器GIL主循环)来控制,对python虚拟机的访问由python全局解释器锁GIL来控制,正是这个锁保证了任一时刻只有一个线程在运行。
不建议使用thread模块的原因:这样做有很多原因,很明显的一个原因是,当主线程退出的时候,所有其它线程没有被清除就退出了。但另一个模块 threading 就能确保所有“重要的”子线程都退出后,进程才会结束。threading比thread更加高级。
另一个不要使用 thread 原因是,对于你的进程什么时候应该结束完全没有控制,当主线程结束时,所有的线程都会被强制结束掉,没有警告也不会有正常的清除工作。我们之前说过,至少threading 模块能确保重要的子线 程退出后进程才退出。
python 3.3中使用import thread会报错,这是因为没有打开线程支持,需要重新编译python解释器才能运行。
python提供了几个多线程编程的模块:thread、threading、queue
单线程
在好些年前的MS-DOS时代,操作系统处理问题都是单任务的,我想做听音乐和看电影两件事儿,那么一定要先排一下顺序。
(好吧!我们不纠结在DOS时代是否有听音乐和看影的应用。^_^)
from time import ctime,sleep
def music():
for i in range(2):
print "I was listening to music. %s" %ctime()
sleep(1)
def move():
for i in range(2):
print "I was at the movies! %s" %ctime()
sleep(5)
if __name__ == '__main__':
music()
move()
print "all over %s" %ctime()
我们先听了一首音乐,通过for循环来控制音乐的播放了两次,每首音乐播放需要1秒钟,sleep()来控制音乐播放的时长。接着我们又看了一场电影,
每一场电影需要5秒钟,因为太好看了,所以我也通过for循环看两遍。在整个休闲娱乐活动结束后,我通过
print "all over %s" %ctime()
看了一下当前时间,差不多该睡觉了。
运行结果:
>>=========================== RESTART ================================
>>>
I was listening to music. Thu Apr 17 10:47:08 2014
I was listening to music. Thu Apr 17 10:47:09 2014
I was at the movies! Thu Apr 17 10:47:10 2014
I was at the movies! Thu Apr 17 10:47:15 2014
all over Thu Apr 17 10:47:20 2014
其实,music()和move()更应该被看作是音乐和视频播放器,至于要播放什么歌曲和视频应该由我们使用时决定。所以,我们对上面代码做了改造:
#coding=utf-8
import threading
from time import ctime,sleep
def music(func):
for i in range(2):
print "I was listening to %s. %s" %(func,ctime())
sleep(1)
def move(func):
for i in range(2):
print "I was at the %s! %s" %(func,ctime())
sleep(5)
if __name__ == '__main__':
music(u'爱情买卖')
move(u'阿凡达')
print "all over %s" %ctime()
对music()和move()进行了传参处理。体验中国经典歌曲和欧美大片文化。
运行结果:
>>> ======================== RESTART ================================
>>>
I was listening to 爱情买卖. Thu Apr 17 11:48:59 2014
I was listening to 爱情买卖. Thu Apr 17 11:49:00 2014
I was at the 阿凡达! Thu Apr 17 11:49:01 2014
I was at the 阿凡达! Thu Apr 17 11:49:06 2014
all over Thu Apr 17 11:49:11 2014
多线程
科技在发展,时代在进步,我们的CPU也越来越快,CPU抱怨,P大点事儿占了我一定的时间,其实我同时干多个活都没问题的;于是,操作系统就进入了多任务时代。我们听着音乐吃着火锅的不在是梦想。
python提供了两个模块来实现多线程thread 和threading ,thread 有一些缺点,在threading 得到了弥补,为了不浪费你和时间,所以我们直接学习threading 就可以了。
开始学习Python线程
Python中使用线程有两种方式:函数或者用类来包装线程对象。
函数式:调用thread模块中的start_new_thread()函数来产生新线程。语法如下:
thread.start_new_thread ( function, args[, kwargs] )
参数说明:
function - 线程函数。
args - 传递给线程函数的参数,他必须是个tuple类型。
kwargs - 可选参数。
实例:
#!/usr/bin/python
# -*- coding: UTF-8 -*-
import thread
import time
# 为线程定义一个函数
def print_time( threadName, delay):
count = 0
while count < 5:
time.sleep(delay)
count += 1
print "%s: %s" % ( threadName, time.ctime(time.time()) )
# 创建两个线程
try:
thread.start_new_thread( print_time, ("Thread-1", 2, ) )
thread.start_new_thread( print_time, ("Thread-2", 4, ) )
except:
print "Error: unable to start thread"
while 1:
pass
执行以上程序输出结果如下:
Thread-1: Thu Jan 22 15:42:17 2009
Thread-1: Thu Jan 22 15:42:19 2009
Thread-2: Thu Jan 22 15:42:19 2009
Thread-1: Thu Jan 22 15:42:21 2009
Thread-2: Thu Jan 22 15:42:23 2009
Thread-1: Thu Jan 22 15:42:23 2009
Thread-1: Thu Jan 22 15:42:25 2009
Thread-2: Thu Jan 22 15:42:27 2009
Thread-2: Thu Jan 22 15:42:31 2009
Thread-2: Thu Jan 22 15:42:35 2009
线程的结束一般依靠线程函数的自然结束;也可以在线程函数中调用thread.exit(),他抛出SystemExit exception,达到退出线程的目的。
线程模块
Python通过两个标准库thread和threading提供对线程的支持。thread提供了低级别的、原始的线程以及一个简单的锁。
thread 模块提供的其他方法:
threading.currentThread(): 返回当前的线程变量。
threading.enumerate(): 返回一个包含正在运行的线程的list。正在运行指线程启动后、结束前,不包括启动前和终止后的线程。
threading.activeCount(): 返回正在运行的线程数量,与len(threading.enumerate())有相同的结果。
除了使用方法外,线程模块同样提供了Thread类来处理线程,Thread类提供了以下方法:
run(): 用以表示线程活动的方法。
start():启动线程活动。
join([time]): 等待至线程中止。这阻塞调用线程直至线程的join() 方法被调用中止-正常退出或者抛出未处理的异常-或者是可选的超时发生。
isAlive(): 返回线程是否活动的。
getName(): 返回线程名。
setName(): 设置线程名。
使用Threading模块创建线程
使用Threading模块创建线程,直接从threading.Thread继承,然后重写__init__方法和run方法:
#!/usr/bin/python
# -*- coding: UTF-8 -*-
import threading
import time
exitFlag = 0
class myThread (threading.Thread): #继承父类threading.Thread
def __init__(self, threadID, name, counter):
threading.Thread.__init__(self)
self.threadID = threadID
self.name = name
self.counter = counter
def run(self): #把要执行的代码写到run函数里面 线程在创建后会直接运行run函数
print "Starting " + self.name
print_time(self.name, self.counter, 5)
print "Exiting " + self.name
def print_time(threadName, delay, counter):
while counter:
if exitFlag:
thread.exit()
time.sleep(delay)
print "%s: %s" % (threadName, time.ctime(time.time()))
counter -= 1
# 创建新线程
thread1 = myThread(1, "Thread-1", 1)
thread2 = myThread(2, "Thread-2", 2)
# 开启线程
thread1.start()
thread2.start()
print "Exiting Main Thread"
以上程序执行结果如下;
Starting Thread-1
Starting Thread-2
Exiting Main Thread
Thread-1: Thu Mar 21 09:10:03 2013
Thread-1: Thu Mar 21 09:10:04 2013
Thread-2: Thu Mar 21 09:10:04 2013
Thread-1: Thu Mar 21 09:10:05 2013
Thread-1: Thu Mar 21 09:10:06 2013
Thread-2: Thu Mar 21 09:10:06 2013
Thread-1: Thu Mar 21 09:10:07 2013
Exiting Thread-1
Thread-2: Thu Mar 21 09:10:08 2013
Thread-2: Thu Mar 21 09:10:10 2013
Thread-2: Thu Mar 21 09:10:12 2013
Exiting Thread-2
线程同步
如果多个线程共同对某个数据修改,则可能出现不可预料的结果,为了保证数据的正确性,需要对多个线程进行同步。
使用Thread对象的Lock和Rlock可以实现简单的线程同步,这两个对象都有acquire方法和release方法,对于那些需要每次只允许一个线程操作的数据,可以将其操作放到acquire和release方法之间。如下:
多线程的优势在于可以同时运行多个任务(至少感觉起来是这样)。但是当线程需要共享数据时,可能存在数据不同步的问题。
考虑这样一种情况:一个列表里所有元素都是0,线程"set"从后向前把所有元素改成1,而线程"print"负责从前往后读取列表并打印。
那么,可能线程"set"开始改的时候,线程"print"便来打印列表了,输出就成了一半0一半1,这就是数据的不同步。为了避免这种情况,引入了锁的概念。
锁有两种状态——锁定和未锁定。每当一个线程比如"set"要访问共享数据时,必须先获得锁定;如果已经有别的线程比如"print"获得锁定了,那么就让线程"set"暂停,也就是同步阻塞;等到线程"print"访问完毕,释放锁以后,再让线程"set"继续。
经过这样的处理,打印列表时要么全部输出0,要么全部输出1,不会再出现一半0一半1的尴尬场面。
实例:
#!/usr/bin/python
# -*- coding: UTF-8 -*-
import threading
import time
class myThread (threading.Thread):
def __init__(self, threadID, name, counter):
threading.Thread.__init__(self)
self.threadID = threadID
self.name = name
self.counter = counter
def run(self):
print "Starting " + self.name
# 获得锁,成功获得锁定后返回True
# 可选的timeout参数不填时将一直阻塞直到获得锁定
# 否则超时后将返回False
threadLock.acquire()
print_time(self.name, self.counter, 3)
# 释放锁
threadLock.release()
def print_time(threadName, delay, counter):
while counter:
time.sleep(delay)
print "%s: %s" % (threadName, time.ctime(time.time()))
counter -= 1
threadLock = threading.Lock()
threads = []
# 创建新线程
thread1 = myThread(1, "Thread-1", 1)
thread2 = myThread(2, "Thread-2", 2)
# 开启新线程
thread1.start()
thread2.start()
# 添加线程到线程列表
threads.append(thread1)
threads.append(thread2)
# 等待所有线程完成
for t in threads:
t.join()
print "Exiting Main Thread"
线程优先级队列( Queue)
Python的Queue模块中提供了同步的、线程安全的队列类,包括FIFO(先入先出)队列Queue,LIFO(后入先出)队列LifoQueue,和优先级队列PriorityQueue。这些队列都实现了锁原语,能够在多线程中直接使用。可以使用队列来实现线程间的同步。
Queue模块中的常用方法:
Queue.qsize() 返回队列的大小
Queue.empty() 如果队列为空,返回True,反之False
Queue.full() 如果队列满了,返回True,反之False
Queue.full 与 maxsize 大小对应
Queue.get([block[, timeout]])获取队列,timeout等待时间
Queue.get_nowait() 相当Queue.get(False)
Queue.put(item) 写入队列,timeout等待时间
Queue.put_nowait(item) 相当Queue.put(item, False)
Queue.task_done() 在完成一项工作之后,Queue.task_done()函数向任务已经完成的队列发送一个信号
Queue.join() 实际上意味着等到队列为空,再执行别的操作
实例:
#!/usr/bin/python
# -*- coding: UTF-8 -*-
import Queue
import threading
import time
exitFlag = 0
class myThread (threading.Thread):
def __init__(self, threadID, name, q):
threading.Thread.__init__(self)
self.threadID = threadID
self.name = name
self.q = q
def run(self):
print "Starting " + self.name
process_data(self.name, self.q)
print "Exiting " + self.name
def process_data(threadName, q):
while not exitFlag:
queueLock.acquire()
if not workQueue.empty():
data = q.get()
queueLock.release()
print "%s processing %s" % (threadName, data)
else:
queueLock.release()
time.sleep(1)
threadList = ["Thread-1", "Thread-2", "Thread-3"]
nameList = ["One", "Two", "Three", "Four", "Five"]
queueLock = threading.Lock()
workQueue = Queue.Queue(10)
threads = []
threadID = 1
# 创建新线程
for tName in threadList:
thread = myThread(threadID, tName, workQueue)
thread.start()
threads.append(thread)
threadID += 1
# 填充队列
queueLock.acquire()
for word in nameList:
workQueue.put(word)
queueLock.release()
# 等待队列清空
while not workQueue.empty():
pass
# 通知线程是时候退出
exitFlag = 1
# 等待所有线程完成
for t in threads:
t.join()
print "Exiting Main Thread"
以上程序执行结果:
Starting Thread-1
Starting Thread-2
Starting Thread-3
Thread-1 processing One
Thread-2 processing Two
Thread-3 processing Three
Thread-1 processing Four
Thread-2 processing Five
Exiting Thread-3
Exiting Thread-1
Exiting Thread-2
Exiting Main Thread
学习笔记
import threading
import urllib2
import urllib
import base64
import time
class GETyouku:
def __init__(self,thread_num):
self.thread_count=self.thread_num=thread_num
self.lock=threading.Lock()
def _getyoukucount(self,ii):
thread_id=int(threading.currentThread().getName())
self.str=2
self.str+=ii
while self.str > 1 and self.str<300:
self.base64_str=base64.b64encode(str(self.str))
url="http://i.youku.com/u/U"+self.base64_str
req=urllib2.Request(url)
print 'self.str:'+str(self.str)+urllib2.urlopen(req).read()
self.str+=1
self.lock.acquire()
self.thread_count -= 1
self.lock.release()
def run(self):
for i in range(self.thread_num):
q=threading.Thread(target=self._getyoukucount,name=str(i),args=(i,))
q.setDaemon(True)
q.start()
while self.thread_count>0:
time.sleep(0.01)
if __name__ == '__main__':
d=GETyouku(thread_num=20)
d.run()
-
上一个: ThinkPHP调试信息的学习笔记
-
下一个: PHP七种不同的个性创意验证码例子
相关文章
- java多线程例子学习笔记 06-27
- java多线程学习笔记之线程安全 11-23
- PHP导出数据超时的优化建议解读 10-31
- PHP之mysql位运算解析 10-31
- Laravel实现登录跳转功能解析 10-31
- php双向队列解读 10-31